热门站点| 世界资料网 | 专利资料网 | 世界资料网论坛
收藏本站| 设为首页| 首页

JJG 658-2010 烘干法水分测定仪检定规程

作者:标准资料网 时间:2024-05-17 06:03:56  浏览:9294   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:烘干法水分测定仪检定规程
英文名称:Verification regulation of thermogravimetric moisture meters
替代情况:替代JJG 658-1990
发布部门:中华人民共和国国家质量监督检验检疫总局
发布日期:2010-11-05
实施日期:2011-05-05
首发日期:
作废日期:
主管部门:全国质量、密度计量技术委员会
归口单位:全国质量、密度计量技术委员会
起草单位:上海市计量测试技术研究院、中国计量科学研究院等
起草人:苏祎、丁京安等
出版社:中国标准出版社
出版日期:2011-05-05
页数:24页
适用范围

本规程适用于以检测水分含量为目的的烘干法水分测定仪的首次检定(修理后的检定视同首次检定,下同)、后续检定和使用中检验。该类水分测定仪主要对物理形态和化学形态相对稳定的样品进行水分含量的测定。

前言

没有内容

目录

引言 (1) 1 范围 (1) 2 引用文献 (1) 3 术语和计量单位 (1) 3.1 术语 (1) 3.2 计量单位 (2) 4 概述 (2) 5 计量性能要求 (2) 5.1 准确度等级 (2) 5.2 实际分度值d (3) 5.3 检定分度值e (3) 5.4 示值误差 (3) 5.5 重复性 (3) 5.6 水分测定误差 (3) 5.7 配套砝码的误差 (4) 5.8 试样盘的误差 (4) 6 通用技术要求 (4) 6.1 外观要求 (4) 6.2 工作正常性要求 (5) 6.3 工作温度要求 (5) 6.4 功能要求 (6) 6.5 安全和可靠性 (6) 7 计量器具控制 (7) 7.1 检定条件 (7) 7.2 检定项目 (8) 7.3 检定方法 (9) 7.4 检定结果处理 (12) 7.5 检定周期 (12) 附录A 氯化钠溶液的制备 (13) 附录B 模拟水分测定仪检定记录表 (15) 附录C 数显水分测定仪检定记录表 (16) 附录D 烘干法水分测定仪检定证书内页格式 (17) 附录E 烘干法水分测定仪检定结果通知书内页格式 (18)

引用标准

本规程引用下列文献:
JJG98—2006 机械天平检定规程
JJG99—2006 砝码检定规程
JJG1036—2008 电子天平检定规程
JJF1229—2009 质量密度计量名词术语及定义
OIMLR59—国际建议《谷物或菜籽水分测定仪》
OIMLR76—国际建议《非自动衡器》
GB/T601—2002 化学试剂标准滴定溶液的制备
使用本规程时,应注意使用上述引用文献的现行有效版本。

所属分类: 综合 计量 电磁计量 计量学和测量 物理现象 电学 磁学 电和磁的测量
下载地址: 点击此处下载
基本信息
标准名称:化工产品折光率测定法
英文名称:Test method for refractive index of chemical products
中标分类: 化工 >> 化工综合 >> 基础标准与通用方法
ICS分类: 化工技术 >> 分析化学 >> 化学分析
替代情况:被GB/T 6488-2008代替
发布部门:国家标准局
发布日期:1986-04-02
实施日期:1987-04-01
首发日期:1986-04-26
作废日期:2008-12-01
主管部门:中国石油和化学工业协会
归口单位: 全国化学标准化技术委员会
起草单位:山西化工研究所
出版社:中国标准出版社
出版日期:1987-04-01
页数:1页
适用范围

本标准适用于液体化工产品折光率的测定。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 化工综合 基础标准与通用方法 化工技术 分析化学 化学分析
Product Code:SAE J90
Title:Standard Classification System for Nonmetallic Automotive Gasket Materials (Cancelled Jul 2008)
Issuing Committee:Sae Ic Powertrain Steering Committee
Scope:The classification system provides a means for specifying or describing pertinent properties of commercial nonmetallic gasket materials. Materials composed of asbestos, cork, cellulose, and other organic or inorganic materials in combination with various binders or impregnants are included. Materials normally classified as rubber compounds are not included, since they are covered in SAE J200 - ASTM D 2000. Gasket coatings are not covered, since details thereof are intended to be given on engineering drawings or in separate specifications.Since all of the properties that contribute to gasket performance are not included, use of the classification system as a basis for selecting materials is limited.The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This SAE Recommended Practice may involve hazardous materials, operations, and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.lems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

版权声明:所有资料均为作者提供或网友推荐收集整理而来,仅供爱好者学习和研究使用,版权归原作者所有。
如本站内容有侵犯您的合法权益,请和我们取得联系,我们将立即改正或删除。
京ICP备14017250号-1