BS ISO 8279-2008 航空航天系列.等级为:600MPa(室温)/120℃、600MPa(室温)/235℃、900MPa(室温)/425℃、1100MPa(室温)/235℃、1100MPa(室温)/315℃、1100MPa(室温)/650℃、1210MPa(室温)/730℃、1250MPa(室温)/235℃和1550MPa(室温)/600℃、带MJ螺纹的、标称高度、标称对边宽度的普通六角螺母

上一篇: BS EN 61158-4-16-2008 工业通讯网络.现场总线规范.第4-16部分:数据链路层协议规范.16型元件
下一篇: BS ISO 3193-2008 航空航天.强度等级≤1100MPa涂覆或未涂覆的短或中等长度MJ螺纹金属材料标准杆、标准六角头螺栓.尺寸

【英文标准名称】:Pneumaticfluidpower--Five-portdirectionalcontrolvalves--Part2:Mountinginterfacesurfacewithoptionalelectricalconnector
【原文标准名称】:气动液压动力.五阀口方向控制阀.第2部分:带任选电气连接器的安装界面
【标准号】:JISB8375-2-2000
【标准状态】:作废
【国别】:日本
【发布日期】:2000-02-20
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JISC)
【起草单位】:TechnicalCommitteeonIndustrialMachinery
【标准类型】:()
【标准水平】:()
【中文主题词】:气动传动系统;气动控制系统;压力调节器;气动设备;气动控制设备
【英文主题词】:pneumaticequipment;pneumaticcontrolsystems;pressureregulators;pneumatictransmissionsystems;pneumaticcontrolequipment
【摘要】:
【中国标准分类号】:J20
【国际标准分类号】:23_100_50
【页数】:16P;A4
【正文语种】:日语


Product Code:SAE J452
Title:General Information-Chemical Compositions, Mechanical and Physical Properties of SAE Aluminum Casting Alloys
Issuing Committee:Metals Technical Executive Steering Committee
Scope:The SAE Standards for aluminum casting alloys cover a wide range of castings for general and special use, but do not include all the alloys in commercial use. Over the years, aluminum alloys have been identified by many numbering systems as shown in Table 1. Presently, SAE is recommending the use of the UNS Numbering System to identify these materials. The castings are made principally by sand cast, permanent mold, or die cast methods; however, shell molding, investment casting, plaster cast, and other less common foundry methods may also be used. If the alloys listed do not have the desired characteristics, it is recommended that the manufacturers of aluminum castings be consulted.