QC/T 7-1992 汽车产品设计文件编号规则
作者:标准资料网 时间:2024-05-09 19:16:45 浏览:8461
来源:标准资料网
基本信息
标准名称: | 汽车产品设计文件编号规则 |
中标分类: |
车辆 >>
汽车 >>
汽车综合 |
发布部门: | 中国汽车工业总公司 |
发布日期: | 1992-05-21 |
实施日期: | 1993-06-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
页数: | 3页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 车辆 汽车 汽车综合
Product Code:SAE J518/1
Title:Hydraulic Flanged Tube, Pipe, and Hose Connections, Screw Flange Connection Part 1: 3.5 MPa to 35 MPa (Code 61)
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope: This SAE Standard covers general and dimensional specifications for the Code 61 metric and inch flanged heads, flange clamps, and split flange clamps applicable to four-screw flange type tube, pipe, and hose connections. Also, included are the recommended port dimensions and port design considerations.The flange heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections.THE RATED WORKING PRESSURE OF AN ASSEMBLY SHALL NOT EXCEED THE LEAST OF ALL THE COMPONENT WORKING PRESSURE RATED VALUES.The following general specifications supplement the dimensional data contained in the tables with respect to all unspecified detail.
Rationale: This SAE Standard covers general and dimensional specifications for the Code 61 metric and inch flanged heads, flange clamps, and split flange clamps applicable to four-screw flange type tube, pipe, and hose connections. Also, included are the recommended port dimensions and port design considerations.The flange heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections.THE RATED WORKING PRESSURE OF AN ASSEMBLY SHALL NOT EXCEED THE LEAST OF ALL THE COMPONENT WORKING PRESSURE RATED VALUES.The following general specifications supplement the dimensional data contained in the tables with respect to all unspecified detail.【英文标准名称】:ProductDataExchangeusingSTEP(PDES):Part203-ApplicationProtocol:ConfigurationControlledDesign
【原文标准名称】:用STEP的产品数据交换(PDES):第203部分:应用协议:受配置控制的设计
【标准号】:ANSI/USPRO/IPO200-203-1994
【标准状态】:作废
【国别】:美国
【发布日期】:1994
【实施或试行日期】:
【发布单位】:美国国家标准学会(ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:电子数据交换;设计;信息技术;产品数据
【英文主题词】:electronicdatainterchanges;informationtechnology;productdata;design
【摘要】:
【中国标准分类号】:L78
【国际标准分类号】:35_240_50
【页数】:
【正文语种】:英语